Seldons
nm to ft lbs
1 newton-meter = 0.737562 foot-pounds.
This converter runs entirely in your browser. Nothing you type is sent to a server.
How do you convert newton-meters to foot-pounds?
Use this formula. It is exact — these units are defined by international agreement, not measured.
ft·lb = N·m ÷ 1.35581795
Example: 10 N·m × 0.737562149 = 7.37562 ft·lb.
nm to ft lbs conversion table
Common values, rounded to six significant figures.
| N·m | ft·lb |
|---|---|
| 1 N·m | 0.737562 ft·lb |
| 5 N·m | 3.68781 ft·lb |
| 10 N·m | 7.37562 ft·lb |
| 15 N·m | 11.0634 ft·lb |
| 20 N·m | 14.7512 ft·lb |
| 25 N·m | 18.4391 ft·lb |
| 30 N·m | 22.1269 ft·lb |
| 40 N·m | 29.5025 ft·lb |
| 50 N·m | 36.8781 ft·lb |
| 60 N·m | 44.2537 ft·lb |
| 75 N·m | 55.3172 ft·lb |
| 90 N·m | 66.3806 ft·lb |
| 100 N·m | 73.7562 ft·lb |
| 110 N·m | 81.1318 ft·lb |
| 120 N·m | 88.5075 ft·lb |
| 150 N·m | 110.634 ft·lb |
| 200 N·m | 147.512 ft·lb |
Torque specs are where this matters and where guessing is expensive. European and Japanese service manuals give newton-meters; US manuals and most torque wrenches sold in the States read foot-pounds. Under-torquing a wheel nut lets it loosen; over-torquing stretches the stud, and neither failure is obvious until it matters.
Values worth remembering
These come up often enough that knowing them saves a lookup.
- 110 N·m = 81.1318 ft·lba typical car wheel nut
- 25 N·m = 18.4391 ft·lba bicycle crank bolt
- 1 N·m = 0.737562 ft·lbone newton-meter
Questions people ask
How many foot-pounds is 1 newton-meter?
1 newton-meter is 0.737562 foot-pounds.
How many newton-meters is 1 foot-pound?
1 foot-pound is 1.35582 newton-meters.
How do you convert newton-meters to foot-pounds in your head?
Use × 0.74. That lands within a percent or so of the exact figure, which is close enough for packing, shipping estimates and shopping — use the calculator when the number has to be right.
Is the newton-meter to foot-pound conversion exact?
Yes. The relationship is exact by international agreement, so 0.737562149 is a definition rather than a measurement. Rounding in the answer comes from display, not from the conversion.